Home / Audi Tyre Pressures / Audi R8 Tyre Pressure

Audi R8 Tyre Pressure

Verified: January 2022

Official factory recommendations for the Audi R8 Tyre Pressure. Values range from 45 to 45 PSI depending on trim/load.

Audi R8 Tyre Pressure
Audi R8

About Audi R8

Audi R8 recommended tyre pressure can be found on a tyre placard on the side of driver’s door or door jam, on the fuel door or in the owners manual. Tyre inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals).

Audi R8 Tyre Pressures

Checking regularly all tyres on your Audi R8, including your spare tyre, once a month or before a long trip is recommended. 

Pressure Data

Units:

Model / Engine

Tyre Size

Front tyre pressure

Rear tyre pressure

Audi R8 5.2 FSI Quattro Coupe

235 35 R19 91Y VA XL

45

 

Audi R8 5.2 FSI Quattro Coupe

295 30 R19 100Y HA XL

  41

Audi R8 5.2 FSI Quattro Coupe

305 30 R19 102Y HA XL

  41

Audi R8 5.2 FSI Quattro Spyder

235 35 R19 91Y VA XL

45

 

Audi R8 5.2 FSI Quattro Spyder

295 30 R19 100Y HA XL

  41

Audi R8 5.2 FSI Quattro Spyder

305 30 R19 102Y HA XL

  41
Disclaimer: Tyre pressure data is for reference only. Always consult your vehicle's owner's manual or door jamb placard for the most accurate values.

How to Check and Maintain the Tyre Pressure on Your Audi R8 Tyre Pressure

  1. Cool Down: Ensure tyres are cold (driven less than 2 miles).
  2. Unscrew: Remove the valve cap from the tyre valve.
  3. Measure: Press your gauge onto the valve stem firmly.
  4. Compare: Match reading to the table above or your door placard.
  5. Adjust: Add air if low; release air if high (using the pin in the valve).
  6. Cap: Replace the valve cap securely.

Understanding the Importance of Proper Tyre Pressure for Your Audi R8 Tyre Pressure

Maintaining the correct tyre pressure is essential for the longevity of your tyres and fuel efficiency. Under-inflated tyres can lead to overheating and premature failure, while over-inflation results in a harsh ride, reduced traction, and uneven tread wear.

Maintaining the Ideal Tyre Pressure for Your Audi R8 Tyre Pressure: Dos and Don'ts

  • Do check pressures when tyres are cold (driven less than 2 miles).
  • Do use a reliable gauge; gas station gauges can be inaccurate.
  • Don't bleed air from hot tyres; pressures naturally rise when driving.
  • Don't ignore the spare tyre check.

Winter vs. Summer Tyre Pressures

In winter, for the Audi R8 Tyre Pressure, consider adding 0.2 bar (3 PSI) to the standard pressures if you are using winter tyres, as cold air causes pressure to drop.

5-Point Tyre Safety Check

  • Pressure: Check all 4 tyres + spare monthly.
  • Condition: Look for cuts, bulges, or embedded objects.
  • Tread: Legal minimum is 1.6mm; recommended replacement at 3mm.
  • Valves: Ensure caps are tight to prevent dirt ingress.
  • Alignment: uneven wear indicates tracking issues.

Frequently Asked Questions

What is the recommended tyre pressure for the Audi R8 Tyre Pressure?

For the Audi R8 Tyre Pressure, the recommended tyre pressure typically ranges between 45 PSI and 45 PSI, depending on the specific trim level and year of manufacture. Always check your door jamb placard for the exact value.

What tyre sizes fit the Audi R8 Tyre Pressure?

Common tyre sizes for the Audi R8 Tyre Pressure include 45. Consult your vehicle's owner's manual for the full range of approved sizes.

How often should I check my Audi R8 Tyre Pressure tyre pressure?

You should check the tyre pressure on your Audi R8 Tyre Pressure at least once a month and before any long journeys. Cold inflation pressure (before driving) provides the most accurate reading.