Ford B-Max Tyre Pressure - Correct PSI Pressure

About Ford B-Max

Please find below some useful information about the correct tyre pressure for your Ford B-Max. It is important to note that this information is intended as a guide only, and the most accurate listing of the tyre pressures for your vehicle can be found on the tyre pressure placard that is attached to your vehicle.

Ford B-Max recommended tyre pressure can be found on a tyre placard on the side of driver’s door or door jam, on the fuel door or in the owners manual. Tyre inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals).

Ford B-Max Tyre Pressures

Checking regularly all tyres on your Ford B-Max, including your spare tyre, once a month or before a long trip is recommended.

Pressure Data

Units:

Model / Engine	Tyre Size	Front tyre pressure	Rear tyre pressure
Ford B-Max 1.4	195 55 R16 87H	32	32
Ford B-Max 1.4	195 60 R15 88H	32	30
Ford B-Max 1.4	205 45 R17 88V XL	35	30
Ford B-Max 1.5 TDCi	195 55 R16 87T	32	32
Ford B-Max 1.5 TDCi	195 60 R15 88T	32	30
Ford B-Max 1.6	195 55 R16 87H	32	32
Ford B-Max 1.6	195 60 R15 88H	32	30
Ford B-Max 1.6	205 45 R17 88V XL	35	30

Disclaimer: Tyre pressure data is for reference only. Always consult your vehicle's owner's manual or door jamb placard for the most accurate values.

How to Check and Maintain the Tyre Pressure on Your Ford B-Max Tyre Pressure

Cool Down: Ensure tyres are cold (driven less than 2 miles).
Unscrew: Remove the valve cap from the tyre valve.
Measure: Press your gauge onto the valve stem firmly.
Compare: Match reading to the table above or your door placard.
Adjust: Add air if low; release air if high (using the pin in the valve).
Cap: Replace the valve cap securely.

Understanding the Importance of Proper Tyre Pressure for Your Ford B-Max Tyre Pressure

Maintaining the correct tyre pressure is essential for the longevity of your tyres and fuel efficiency. Under-inflated tyres can lead to overheating and premature failure, while over-inflation results in a harsh ride, reduced traction, and uneven tread wear.

Maintaining the Ideal Tyre Pressure for Your Ford B-Max Tyre Pressure: Dos and Don'ts

Do check pressures when tyres are cold (driven less than 2 miles).
Do use a reliable gauge; gas station gauges can be inaccurate.
Don't bleed air from hot tyres; pressures naturally rise when driving.
Don't ignore the spare tyre check.

Winter vs. Summer Tyre Pressures

In winter, for the Ford B-Max Tyre Pressure, consider adding 0.2 bar (3 PSI) to the standard pressures if you are using winter tyres, as cold air causes pressure to drop.

5-Point Tyre Safety Check

Pressure: Check all 4 tyres + spare monthly.
Condition: Look for cuts, bulges, or embedded objects.
Tread: Legal minimum is 1.6mm; recommended replacement at 3mm.
Valves: Ensure caps are tight to prevent dirt ingress.
Alignment: uneven wear indicates tracking issues.

Frequently Asked Questions

What is the recommended tyre pressure for the Ford B-Max Tyre Pressure?

For the Ford B-Max Tyre Pressure, the recommended tyre pressure typically ranges between 30 PSI and 35 PSI, depending on the specific trim level and year of manufacture. Always check your door jamb placard for the exact value.

What tyre sizes fit the Ford B-Max Tyre Pressure?

Common tyre sizes for the Ford B-Max Tyre Pressure include 32. Consult your vehicle's owner's manual for the full range of approved sizes.

How often should I check my Ford B-Max Tyre Pressure tyre pressure?

You should check the tyre pressure on your Ford B-Max Tyre Pressure at least once a month and before any long journeys. Cold inflation pressure (before driving) provides the most accurate reading.