Ford Ranger Tyre Pressure - Correct PSI Pressure

About Ford RangerPlease find below some useful information about the correct tyre pressure for your Ford Ranger. It is important to note that this information is intended as a guide only, and the most accurate listing of the tyre pressures for your vehicle can be found on the tyre pressure placard that is attached to your vehicle.Ford Ranger recommended tyre pressure can be found on a tyre placard on the side of driver’s door or door jam, on the fuel door or in the owners manual. Tyre inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals).

Ford Ranger Tyre Pressures

Checking regularly all tyres on your Ford Ranger, including your spare tyre, once a month or before a long trip is recommended.

Pressure Data

Units:

Model / Engine	Tyre Size	Front tyre pressure	Rear tyre pressure
Ford Ranger 2.2 TDCi	215 70 R16 108T C 6PR 4x4	35	35
Ford Ranger 2.2 TDCi	255 70 R16 111T 4x4	35	35
Ford Ranger 2.5 TDCi	235 75 R15 109T XL 4x4	30	30
Ford Ranger 2.5 TDCi	245 70 R16 111T XL 4x4	30	30
Ford Ranger 2.5 TDCi	255 60 R18 108H 4x4	33	33
Ford Ranger 3.2 TDCi	265 60 R18 110T 4x4	35	35

Disclaimer: Tyre pressure data is for reference only. Always consult your vehicle's owner's manual or door jamb placard for the most accurate values.

How to Check and Maintain the Tyre Pressure on Your Ford Ranger Tyre Pressure

Cool Down: Ensure tyres are cold (driven less than 2 miles).
Unscrew: Remove the valve cap from the tyre valve.
Measure: Press your gauge onto the valve stem firmly.
Compare: Match reading to the table above or your door placard.
Adjust: Add air if low; release air if high (using the pin in the valve).
Cap: Replace the valve cap securely.

Understanding the Importance of Proper Tyre Pressure for Your Ford Ranger Tyre Pressure

Maintaining the correct tyre pressure is essential for the longevity of your tyres and fuel efficiency. Under-inflated tyres can lead to overheating and premature failure, while over-inflation results in a harsh ride, reduced traction, and uneven tread wear.

Maintaining the Ideal Tyre Pressure for Your Ford Ranger Tyre Pressure: Dos and Don'ts

Do check pressures when tyres are cold (driven less than 2 miles).
Do use a reliable gauge; gas station gauges can be inaccurate.
Don't bleed air from hot tyres; pressures naturally rise when driving.
Don't ignore the spare tyre check.

Winter vs. Summer Tyre Pressures

In winter, for the Ford Ranger Tyre Pressure, consider adding 0.2 bar (3 PSI) to the standard pressures if you are using winter tyres, as cold air causes pressure to drop.

5-Point Tyre Safety Check

Pressure: Check all 4 tyres + spare monthly.
Condition: Look for cuts, bulges, or embedded objects.
Tread: Legal minimum is 1.6mm; recommended replacement at 3mm.
Valves: Ensure caps are tight to prevent dirt ingress.
Alignment: uneven wear indicates tracking issues.

Frequently Asked Questions

What is the recommended tyre pressure for the Ford Ranger Tyre Pressure?

For the Ford Ranger Tyre Pressure, the recommended tyre pressure typically ranges between 30 PSI and 35 PSI, depending on the specific trim level and year of manufacture. Always check your door jamb placard for the exact value.

What tyre sizes fit the Ford Ranger Tyre Pressure?

Common tyre sizes for the Ford Ranger Tyre Pressure include 30. Consult your vehicle's owner's manual for the full range of approved sizes.

How often should I check my Ford Ranger Tyre Pressure tyre pressure?

You should check the tyre pressure on your Ford Ranger Tyre Pressure at least once a month and before any long journeys. Cold inflation pressure (before driving) provides the most accurate reading.