Jeep Commander Tyre Pressure

Jeep Commander

About Jeep Commander

Jeep Commander recommended tyre pressure can be found on a tyre placard on the side of driver’s door or door jam, on the fuel door or in the owners manual. Tyre inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals).

Jeep Commander Tyre Pressures

Checking regularly all tyres on your Jeep Commander, including your spare tyre, once a month or before a long trip is recommended. 

Model / Engine

Tyre Size

Front tyre pressure

Rear tyre pressure

Jeep Commander 4.7 V8

245 60 R18 104H 4×4

36

36

Jeep Commander 4.7 V8

245 65 R17 107H 4×4

36

36

Note: This advice is provided for informational purposes and is only to be used as a guide. Consult your owner’s manual for specific tyre (tire) pressure values for Jeep Commander.

Disclaimer

This page contains the Jeep Commander optimum air / tyre pressure based on UK vehicle data in PSI (lbs / Pounds per square inch) as well as the less common bar and kPa (kilopascals) values. Always refer to vehicle owner’s manual for recommended tire pressure settings. Never over-inflate or overload a tyre beyond its maximum capabilities listed on sidewall.

All data is shown for informational purposes only. TyrePressure.org does not warrant or make any representations regarding the accuracy of or the results of the use of this information.

Other Jeep Vehicles

Scroll to top