Home / Subaru Tyre Pressures / Subaru Legacy Tyre Pressure

Subaru Legacy Tyre Pressure

Verified: December 2022

Official factory recommendations for the Subaru Legacy Tyre Pressure. Values range from 30 to 36 PSI depending on trim/load.

Subaru Legacy Tyre Pressure

About Subaru Legacy

Subaru Legacy recommended tyre pressure can be found on a tyre placard on the side of driver’s door or door jam, on the fuel door or in the owners manual. Tyre inflation will be listed in psi (pounds per square inch), bar or kPa (kilopascals).

Subaru Legacy Tyre Pressures

Checking regularly all tyres on your Subaru Legacy, including your spare tyre, once a month or before a long trip is recommended. 

Pressure Data

Units:
Model / EngineTyre SizeFront tyre pressureRear tyre pressure
Subaru Legacy 2.0 R215 45 R17 91W XL3230
Subaru Legacy 2.0 R215 45 R18 93W XL3230
Subaru Legacy 3.0 R215 45 R17 91W XL3332
Subaru Legacy 3.0 R215 45 R18 93W XL3332
Subaru Legacy Outback 2.5 16V205 50 R17 89H 4x43635
Subaru Legacy Outback 2.5 16V205 60 R16 92H 4x43635
Subaru Legacy Outback 2.5 16V215 55 R17 94H 4x43635
Subaru Legacy Outback 2.5 16V215 60 R16 95H 4x43635
Subaru Legacy Outback 2.5 16V225 45 R17 91H 4x43635
Subaru Legacy Outback 3.0 16V205 50 R17 89V 4x43635
Subaru Legacy Outback 3.0 16V215 55 R17 94V 4x43635
Subaru Legacy Outback 3.0 16V215 60 R16 95V 4x43635
Subaru Legacy Outback 3.0 16V225 45 R17 91V 4x43635
Disclaimer: Tyre pressure data is for reference only. Always consult your vehicle's owner's manual or door jamb placard for the most accurate values.

How to Check and Maintain the Tyre Pressure on Your Subaru Legacy Tyre Pressure

  1. Cool Down: Ensure tyres are cold (driven less than 2 miles).
  2. Unscrew: Remove the valve cap from the tyre valve.
  3. Measure: Press your gauge onto the valve stem firmly.
  4. Compare: Match reading to the table above or your door placard.
  5. Adjust: Add air if low; release air if high (using the pin in the valve).
  6. Cap: Replace the valve cap securely.

Understanding the Importance of Proper Tyre Pressure for Your Subaru Legacy Tyre Pressure

Maintaining the correct tyre pressure is essential for the longevity of your tyres and fuel efficiency. Under-inflated tyres can lead to overheating and premature failure, while over-inflation results in a harsh ride, reduced traction, and uneven tread wear.

Maintaining the Ideal Tyre Pressure for Your Subaru Legacy Tyre Pressure: Dos and Don'ts

  • Do check pressures when tyres are cold (driven less than 2 miles).
  • Do use a reliable gauge; gas station gauges can be inaccurate.
  • Don't bleed air from hot tyres; pressures naturally rise when driving.
  • Don't ignore the spare tyre check.

Winter vs. Summer Tyre Pressures

In winter, for the Subaru Legacy Tyre Pressure, consider adding 0.2 bar (3 PSI) to the standard pressures if you are using winter tyres, as cold air causes pressure to drop.

5-Point Tyre Safety Check

  • Pressure: Check all 4 tyres + spare monthly.
  • Condition: Look for cuts, bulges, or embedded objects.
  • Tread: Legal minimum is 1.6mm; recommended replacement at 3mm.
  • Valves: Ensure caps are tight to prevent dirt ingress.
  • Alignment: uneven wear indicates tracking issues.

Frequently Asked Questions

What is the recommended tyre pressure for the Subaru Legacy Tyre Pressure?

For the Subaru Legacy Tyre Pressure, the recommended tyre pressure typically ranges between 30 PSI and 36 PSI, depending on the specific trim level and year of manufacture. Always check your door jamb placard for the exact value.

What tyre sizes fit the Subaru Legacy Tyre Pressure?

Common tyre sizes for the Subaru Legacy Tyre Pressure include 32. Consult your vehicle's owner's manual for the full range of approved sizes.

How often should I check my Subaru Legacy Tyre Pressure tyre pressure?

You should check the tyre pressure on your Subaru Legacy Tyre Pressure at least once a month and before any long journeys. Cold inflation pressure (before driving) provides the most accurate reading.